Vinyl Graphics Installation Services in Toronto and GTA

We install window vinyl on both first-surface and second-surface applications, including opaque, translucent and optically-clear films. Multi-panel vinyl graphics are installed over the mullions and on all the glass surfaces.. For second-surface installs, we reverse-mount and squeegee with controlled slip to avoid optical distortion. Exterior graphics are trimmed and edge-sealed where required for long-term adhesion in high-traffic retail environments. 

For print shops, here’s our full glass vinyl printing and preparation guide to help with choosing the right vinyl, laminate, layout, packaging for a project.

We install wall murals on painted drywall, primed surfaces, ACM panels, MDF displays and other interior substrates. Surface inspection includes testing for low-VOC paints and high-texture drywall that may require primer or high-tack films. Panels are dry-fitted, leveled, and heat-set to eliminate tension at seams. On textured surfaces, we use cast high-bond films and conform with heat and roller pressure to lock material into the profile. All mural edges are post-inspected for proper adhesion and uniform finish.

See our detailed wall graphics printing and preparation guide for material and production considerations.

Floor vinyl installations use slip-rated laminates suitable for retail and event environments. We thoroughly degrease and clean the surface to prevent vinyl edges lifting caused by cleaning agents or high foot traffic. Graphics are installed with pressure to eliminate micro-air pockets, then rolled to activate adhesive across irregular floor surfaces. For long-term use, we recommend and apply edge-seal protocols in high-wear zones. Outdoor floor graphics (asphalt/concrete) use specialty films with heat-bonded adhesion.

We install precision-cut vinyl lettering on glass, walls, vehicles and any other surfaces surfaces using hinge or full-transfer techniques depending on scale. Application tape tension is controlled to prevent distortion on long text runs. For interior walls, we monitor paint cure time and static contamination to ensure clean adhesion. Multipiece decals are aligned using baseline or centerline methods for consistent spacing in brand-critical environments. All installs are post-checked for edge lift, tunneling or trapped debris.

Perf film requires controlled installation pressure to avoid stretching the hole pattern and distorting the printed image. We install perf with optically-clear laminate and without it, making sure the laminate is tension-free for clean visibility from inside. Alignment across multi-panel windows is handled to avoid mismatched artwork across mullions. Edges are treated to prevent moisture migration that can compromise adhesive. We also inspect inside visibility to ensure proper one-way effect.

We install large-format vinyl on mall barricades, temporary retail walls, and construction hoardings made of drywall, primed plywood or ACM. With our experience we can ensure perfect panels alignment even on very large barricades with vinyl panels sometimes reaching 40' in height.  Our team uses lifts, scaffold or ladders as needed, following mall safety procedures and after-hours access requirements. We service all malls in Toronto, GTA and most surrounding cities.

Translucent films are installed on acrylic or glass sign faces with strict attention to the installation techniques and tools used. Second-surface installs are reverse-mounted and squeegeed with slip solution that does not interfere with adhesive wet-out.  Graphics are trimmed with acrylic-safe blades to prevent stress cracks on sign faces. Ideal for retail lightboxes and architectural backlit features.

We install frosted and etched glass films using wet-application techniques to ensure optical clarity and avoid trapped particles. We can install various types of patterned decorative window films like 3M Fasara. Large frosted panels are positioned, and squeegeed in controlled passes to avoid haze or stretch. Specialty films such as gradient frost or dual-layer privacy films are handled with clean-room precautions. Final trimming is done with micro-blades to achieve perfect finish.

Textured-surface installs use cast high-conformability films designed for masonry applications. We apply controlled heat and roller pressure to push vinyl deep into grout lines and surface cavities, eliminating bridge points. After installation, graphics are post-heated to manufacturer-specified temperatures to set adhesive memory. This method produces a bonded, “paint-like” finish suitable for exterior walls or rough interior architecture.

We install printed wallcoverings and commercial-grade wallpapers on drywall, primed substrates, architectural panels and large feature walls. Panels are aligned using laser references and booked properly to control expansion and seam tension, ensuring tight, invisible joins. We monitor surface porosity, use the correct adhesives or activators, and finish the installation with uniform pressure to prevent curl, lift or uneven gloss across panels.

We provide installation services to printing companies that can print high quality vehicle wraps, partial graphics and lettering but need professional 3M preferred installers. We work with 3M IJ180 and Avery MPI1105 wrapping vinyl. Our installers have done hundreds of vehicle wraps and we can ensure perfect panels alignment, smooth finish without bubbles and peeling.

We remove old vinyl graphics, adhesives, wall murals and window films using controlled heat, residue-safe solvents and proper edge-lift techniques to avoid surface damage. Retail change-outs are scheduled to minimize downtime, and replacement graphics are installed in the same visit when required. Ideal for recurring campaigns and seasonal updates across multiple GTA locations.

We install event graphics, trade show wall systems, floor vinyl, window films and temporary branding elements for expos and short-term activations. Materials are handled with clean-removal requirements in mind, and installs are completed on compressed timelines common to event setups. Suitable for convention centers, pop-ups, product launches and traveling brand exhibits.

We offer after-hours, overnight and rush installation services for projects that cannot occur during business hours. Our team is equipped for rapid scheduling, mall access procedures, and multi-installer deployments when deadlines are tight. This flexibility supports retail rollouts, emergency replacements and last-minute campaign launches across the GTA.

We offer site surveys in the GTA to verify measurements, surface conditions, install height, and substrate compatibility before production. This reduces install risk, prevents sizing errors, and ensures your graphics are produced to match real-world conditions.